NEC UNIVERGE SV8100 Features & Specifications Manual page 561

UNIVERGE SV8100
Prime Line Selection
Guide to Feature Programming
Program
Number
15-02-08
15-02-16
20-02-12
20-06-01
20-09-05
Operation
To talk Handsfree:
1. Press Speaker, Trunk Line key or Virtual Extension key.
2. Place the call.
3. Speak toward the telephone when the called party answers.
Handsfree and Monitor
Program Name
Multiline Telephone Basic Data
Setup – Automatic Handsfree
Multiline Telephone Basic Data
Setup – Handsfree Operation
System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
Class of Service for Extensions
Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Description/Comments
Use this option to set whether
pressing a key accesses a
One-Touch Key (1) or if it
preselects the key (0).
Enable (1) or disable (0) ability of
an extension to use the
speakerphone on outside calls.
When disabled, users can hear
the conversion, but cannot
respond handsfree.
Use this option to enable (1) or
disable (0) Forced Intercom
Ringing. If enabled, incoming
Intercom calls normally ring. If
disabled, Intercom calls
voice-announce.
Assign Class of Service (1~15) for
extensions.
Turn off or on an extension ability
to enable Handsfree Answerback
or Forced Intercom Ringing for
their incoming Intercom calls.
Issue 5.0
Assigned Data
0 = Preselect
1 = One-Touch
(Automatic Handsfree)
(default = 1)
0 = Disable
1 = Enable
(default = 1)
0 = Disable (Voice)
1 = Enable (Signal)
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension
ports = Class 1
0 = Off
1 = On
(default = 1 for COS
1~15)
1 - 551