NEC UNIVERGE SV8100 Features & Specifications Manual page 1060

Issue 5.0
Operation
To call a UCD Group:
1. At the multiline terminal, press the Speaker key.
- OR -
At single line telephone, lift the handset.
2. Dial the UCD group (department) extension or pilot number.
The system routes the call to the first free telephone in the (UCD group) department.
.
To log out of your UCD (Department Calling) Group:
.
While you are logged out, UCD (Department Calling) cannot route calls to your extension.
1. Press the Speaker key.
2. Dial 750 and 1.
- OR -
Press Uniform Call Distribution Log In key (Program 15-07 or SC 851: 46).
The key lights while you are logged out.
.
To log back in to your UCD (Department Calling) Group:
.
While you log back in, Uniform Call Distribution routes calls to your extension.
1. Press the Speaker key.
2. Dial 750 and 0.
- OR -
Press UCD (Department Calling) Log In key (Program 15-07 or SC 851: 46).
The key goes out when you log back in.
.
1 - 1050
UNIVERGE SV8100
Uniform Call Distribution (UCD)