NEC UNIVERGE SV8100 Features & Specifications Manual page 66

Issue 5.0
Related Features
Call Forwarding
Guide to Feature Programming
Program
Number
11-01-01
20-01-01
20-09-07
20-17-01
24-02-01
Operation
None
1 - 56
Program Name
System Numbering – Service
Code
System Options - Operator
Access Mode
Class of Service Options
(Incoming Call Service) – Call
Queuing
Operator Extension – Operator's
Extension Number
System Options for Transfer –
Busy Transfer
Description/Comments
Set the system internal (Intercom)
numbering plan. The numbering
plan assigns the first and second
digits dialed and affects the digits
an extension user must dial to
access other extensions and
features, such as service codes
and trunk codes. If the default
numbering plan does not meet the
site requirements, use this
program to tailor the system
numbering to the site.
Assign the priority of a call when
calling an operator telephone.
Turn Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
Define the extension numbers
which are to be used by operators.
Disable (0) or Enable (1)
extensions to transfer calls to an
attendant that has more than 32
calls in queue.
UNIVERGE SV8100
Assigned Data
Refer to System
Numbering Default
Settings table in the
UNIVERGE SV8100
Programming Manual
for a list of default
settings.
0 = Step
1 = Circular
(default = 0)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Up to eight digits
(default = ext. 101)
0 = Disable
1 = Enable
(default = 1)
Attendant Call Queuing