NEC UNIVERGE SV8100 Features & Specifications Manual page 416

Issue 5.0
Guide to Feature Programming
Program
Number
15-07-01
20-06-01
20-09-01
20-13-23
22-01-04
1 - 406
Program Name
Programmable Function Keys
Class of Service for Extensions
Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
System Options for Incoming
Calls – DIL No Answer Recall
Time
Description/Comments
To have the DIL ring a key,
program a line key for the DIL
trunk.
Assign a Class of Service (1~15)
to an extension.
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
. With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
Select whether an extension
should display the reason a call is
being transferred to their
extension (Call Forward Busy, Call
Forward No Answer, DND).
A DIL that rings its programmed
destination longer than this
interval diverts to the DIL No
Answer Ring Group (set in
Program 22-08).
UNIVERGE SV8100
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 0 seconds)
Direct Inward Line (DIL)