NEC UNIVERGE SV8100 Features & Specifications Manual page 923

UNIVERGE SV8100
Program
Number
15-07-01
15-14-01
15-14-02
20-06-01
20-07-04
20-08-03
20-08-04
Speed Dial – System/Group/Station
Program Name
Programmable Function Keys
Programmable One-Touch Keys
– Station Speed Dial Data
Programmable One-Touch Keys
– Station Speed Dial Name
Class of Service for Extensions
Class of Service Options
(Administrator Level) – Storing
Speed Dialing Entries
COS Options (Outgoing Call
Service) – System Speed Dialing
COS Options (Outgoing Call
Service) – Group Speed Dialing
Description/Comments
Assign a function key for System
Speed Dialing (27) or Group
Speed Dialing (28). You can
program the key as either a
general Speed Dialing key or you
can choose to store a bin number
with the function key. This key
would then always dial the
associated bin number. If storing a
bin number along with the code,
do not store 0, 00 or 000. To
bypass entering a bin number,
press Hold (Hold is also required
if programming the function key
using the service code 851).
Assign the extensions Speed Dial
number (1~10).
Assign the name associated with
the extension Speed Dial Bin
(1~10).
Assign a Class of Service (1~15)
to an extension.
Turns Off (0) or On (1) an
extension to store System or
Group Speed Dialing numbers.
Turns Off (0) or On (1) an
extension ability to make outbound
calls using system speed dial
numbers.
Turns Off (0) or On (1) an
extension ability to make outbound
calls using group speed dial
numbers.
Issue 5.0
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
*
#
1~0, , , Pause,
Hookflash,
@ (Code
for Answer-Wait)
Up to 24 digits
(default not assigned)
Name
(default not assigned)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
1 - 913