NEC UNIVERGE SV8100 Features & Specifications Manual page 408

Issue 5.0
Program
Number
25-02-01
25-03-01
25-04-01
25-05-01
1 - 398
Program Name
VRS/DISA VRS Message
VRS/DISA Transfer Ring Group
With Incorrect Dialing
VRS/DISA Transfer Ring Group
With No Answer/Busy
VRS/DISA Error Message
Assignment
Description/Comments
For each trunk port and each night
mode, select the message source
(0 = No Message, 1 = VRS, 2 =
ACI, 3 =S LT), assign the VRS
message number to be used as
the Automated Attendant
Message for each trunk, which is
assigned as VRS/DISA [with VRS
= 01~100 (VRS message
number), with ACI = 1~4 or 01~16
(ACI group number), with SLT =
1~8 or 01~64 (Department Group
number)].
For each trunk port, set what
happens to a call when the DISA
or Automated Attendant caller
dials incorrectly or waits too long
to dial. The call can either
disconnect (0) or Transfer to an
alternate destination (a ring group,
In-Skin/External, Centralized).
When setting the DISA and DID
Operating Mode, you make an
entry for each Night Service mode.
For each trunk port (001~200), set
the operating mode of each DISA
trunk. This sets what happens to
the call when the DISA or
Automated Attendant caller calls a
busy or unanswered extension.
The call can either disconnect (0)
or Transfer to an alternate
destination (a ring group, In-Skin/
External, Centralized). When
setting the DISA and DID
Operating Mode, you make an
entry for each Night Service mode.
For each trunk that is answered by
the VRS, enter the VRS message
(1~100) the outside caller hears if
they dial incorrectly after answer. If
you enter 0, the call reroutes
according to Program 25-03 and
Program 25-04. Make one entry
for each Night Service mode.
UNIVERGE SV8100
Assigned Data
0 = No Message
1 = 01~100 (VRS
Messages)
2 = 01~4 (ACI Group
Number)
3 = 01~64 (Extension
Group Number)
(default = 0)
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or InMail)
(default = 0)
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or InMail)
(default = 0)
0~100 (0 = No Setting)
(default = 0)
Direct Inward Dialing (DID)