NEC UNIVERGE SV8100 Features & Specifications Manual page 879

UNIVERGE SV8100
Program
Number
15-10-01
22-03-01
1 = High
2 = Mid Range
3 = Low
4 = Ring Tone 1
Operation
To change your extension incoming ring tones:
1. Press Speaker.
2. Dial 820.
3. Dial 1 to set Intercom ring; 2 to set trunk ring.
4. Dial code for the desired ring pattern (1~8).
5. Press Speaker to hang up.
Selectable Ring Tones
Program Name
Incoming Virtual Extension Ring
Tone Order Setup
Trunk Ring Tone Range
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
Description/Comments
When two or more virtual
extensions are set on a function
key on the telephone, and the tone
pattern by which the sound of
each extension differs, the priority
of ring sound is set up.
Select the ring tone range for the
trunk. The trunk uses a ring tone in
the range selected when it rings
an extension. Four ring tones are
available.
Issue 5.0
Assigned Data
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
Order 1 Pattern 0 =
Pattern 1 (default)
Order 2 Pattern 1 =
Pattern 2 (default)
Order 3 Pattern 2 =
Pattern 3 (default)
Order 4 Pattern 3 =
Pattern 4 (default)
0~8
(Ring Tone Pattern
1~4)
(Melody 1~ Melody 5)
(default = 0)
1 - 869