NEC UNIVERGE SV8100 Features & Specifications Manual page 501

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
14-02-14
14-02-21
14-05-01
22-01-04
22-04-01
22-05-01
Facsimile CO Branch Connection
Program Name
Analog Trunk Data Setup – Loop
Start/Ground Start
FAX Branch Connection
Trunk Group
System Options for Incoming
Calls – DIL No Answer Recall
Time
Incoming Extension Ring Group
Assignment
Incoming Trunk Ring Group
Assignment
Description/Comments
Select loop start (0) or ground start
(1) for the trunk.
Sets CO for Fax Branch
Connection.
. If FAX Branch is selected,
Program 14-10 Power
Failure Telephone Setting is
NOT valid.
Assign trunks to trunk groups
(1~100).
A DIL that rings its programmed
destination longer than this
interval diverts to the DIL No
Answer Ring Group (set in
Program 22-08).
Assign extensions to ring groups.
To have the trunks ring
extensions, assign trunks to a
Ring Group. The incoming ring
group assignment programmed in
Program 41-03-01 overrides the
setting in this program.
Issue 5.0
Assigned Data
0 = Loop Start (Loop)
1 = Ground Start
(Ground)
(default = 0)
0 = No
1 = Yes
(default = 0)
Trunk Group Number:
0~100
Priority Number:
1~200
(Default trunks 1~200
= Priority 1~200)
0~64800 (seconds)
(default = 0 seconds)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or InMail)
(default = 1)
1 - 491