NEC UNIVERGE SV8100 Features & Specifications Manual page 660

Issue 5.0
Program
Number
15-07-01
15-13-01
15-13-02
20-07-10
22-04-01
22-05-01
1 - 650
Program Name
Programmable Function Keys
Loop Keys - Outgoing Option
Loop Keys - Incoming Option
Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
Incoming Extension Ring Group
Assignment
Incoming Trunk Ring Group
Assignment
Description/Comments
Program function keys as trunk
group/loop keys (*02 or *05). For
additional data, enter 0 (incoming
only), 1 (outgoing only) or 2 (both
ways). Use Programs 15-13-01 or
15-13-02 to define the trunk
groups used.
Assign trunk groups for outgoing
loop keys (0=ARS, Trunk Groups
1-100). Selecting "0" for ARS
should only be used when ARS is
enabled in Program 26-01-01 or it
could cause the loop key to
lock up.
Assign trunk groups for incoming
loop keys
If an extension should be able to
use Programmable Functions
Keys to program a loop key,
enable this option in the user's
Class of Service (1-15).
Assign extensions to Ring Groups.
An incoming loop key will ring only
for those trunks programmed
to ring. Also see Program 22-05.
Assign trunks to Ring Groups. An
incoming loop key will ring only for
those trunks programmed
to ring. Also see Program 22-04
above.
UNIVERGE SV8100
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
0-100
(0 = Assigns the Loop
Key for ARS,
1-100 = Assigns the
Loop Key to the trunk
group specified)
(default = 0:
Programming Function
Key No. - 01-48)
0-100
(0 = Assigns the Loop
Key to all trunk groups)
1-100 = Assigns the
Loop Key to the trunk
group specified)
(default = 0:
Programming Function
Key No. - 01-48)
0 = Off
1 = On
(default = 1 for COS
01~15)
Maximum eight digits
Default:
Extensions 200 (first
port) ring for incoming
Ring Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or InMail)
(default = 1)
Loop Keys