NEC UNIVERGE SV8100 Features & Specifications Manual page 307

UNIVERGE SV8100
Program
Number
21-06-02
21-06-03
21-06-04
21-06-05
21-06-06
21-06-07
21-06-08
21-09-01
21-09-02
21-10-01
90-19-01
Code Restriction In Credit
Program Name
Toll Restriction Table Data Setup
– International Call Permit Code
Table
Toll Restriction Table Data Setup
– Maximum Number of Digits
Table Assignment
Toll Restriction Table Data Setup
– Common Permit Code Table
Toll Restriction Table Data Setup
– Common Restriction Table
Toll Restriction Table Data Setup
– Permit Code Table
Toll Restriction Table Data Setup
– Deny Restriction Table
Toll Restriction Table Data Setup
– PBX Access Code
Dial Block Setup – Toll
Restriction Class with Dial Block
Dial Block Setup – Supervisor
Password
Dial Block restriction Class per
Extension
Dial Block Release
Description/Comments
Enter the international dialing
codes you want to permit.
Select the maximum number of
digits allowed in outgoing calls for
each table (4~30).
Program codes into the Common
Permit Code Table.
Program codes into the Common
Restrict Code Table.
Program codes into the Permit
Code Tables.
Program codes into the Restrict
Code Tables (200 codes per table
maximum).
The system allows up to four
tables for PBX access codes.
PBX Access Codes can have up
# *
to two digits, using 0~9, ,
LINE KEY 1 (don't care). Refer to
the PBX Compatibility feature for
the specifics.
Assign a Code Restriction COS
(1~15) when the Dial Block feature
is used.
Assign a 4-digit password to be
used by the supervisor to enable
or disable Dial Block for other
extensions.
Assign the Code Restriction COS
(1~15) to be used by an extension
when the Dial Block feature is
enabled. If this data is "0", Code
Restriction COS follows Program
21-09-01.
Enter the extension number to be
released from the Dial Block
Restriction. This program can be
used when a password is forgotten
by the user.
Issue 5.0
Assigned Data
Dial (Up to six digits)
Default:
Tables 1~20 = No
Setting
4-30
default:
Tables 1~ 4 = 30
Dial (Up to four digits)
default:
Table 1 ~ 10 = No
Setting
Dial (Up to 12 digits)
default:
Tables 1~ 10 = No
Setting
Dial (Up to 12 digits)
default:
Table 1~4 = No Setting
Dial (Up to 12 digits)
default:
Table 1~4 = No Setting
Dial (Up to two digits)
default:
Table 1~4 = No Setting
and
1~15
(default = 15)
*
0~9, , #
(4-digit fixed)
(default not assigned)
0, 1~15
(0 = No Setting)
(default = 0)
[Release?]: Dial 1+
press Transfer
(Press Hold to cancel.)
1 - 297