Table 1-13 Restrictions For Calling Party Names - NEC UNIVERGE SV8100 Features & Specifications Manual

UNIVERGE SV8100
The UNIVERGE SV8100 supports receiving the name from the Network in supported
formats only and cannot send the Calling Name. Refer to
Calling Party
NI-2
4ESS (AT&T Custom)
AT&T5ESS Lucent Custom
DMS-100 (Custom)
DMS-100 (National; ISDN)
*
Nortel Specification NIX-A211-1
**
CO Line Service is not supported.
ISDN – PRI cannot be configured for CO Emulation
B-Channel to Trunk Association
When an Incoming ISDN-BRI/PRI call is received, the system assigns the lowest trunk
number of the ISDN circuit to the incoming call associated with the B-Channel. When an
Outgoing call is placed using the ISDN-PRI/BRI, the system assigns the Trunk and
B-Channel association according to the chart below. This is based on the Trunk-to-Trunk
Group and Trunk Group Priority assignment in (Program 14-05-01).
ISDN Compatibility
Names.

Table 1-13 Restrictions for Calling Party Names

Protocols
*
Nortel Specification NIS-A233-1
Name Delivery Formats
Facility Information Elements
Not Supported
Facility Information Element
Display Information Element
** Facility Information Element
Table 1-13 Restrictions for
*
**
Issue 5.0
1 - 613