NEC UNIVERGE SV8100 Features & Specifications Manual page 206

Issue 5.0
Program
Number
20-09-01
20-09-07
20-13-05
20-13-06
20-13-35
20-18-06
1 - 196
Program Name
Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DDI/
DIL/ E&M Override
Class of Service Options
(Incoming Call Service) – Call
Queuing
Class of Service Options
(Supplementary Service) –
Intercom Off-Hook signaling
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Class of Service Options
(Supplementary Service) – Block
Camp-On
Service Tone Timers – Interval of
Call Waiting Tone
Description/Comments
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
. With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
Turn Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
Turn On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
Allows a busy extension ability to
manually (0) or automatically (1)
receive off-hook signals.
Use this option to turn On (1) or
Off (0) extension ability to block
#
callers from dialing to camp-on.
Use this option to set the interval
between call waiting tones. This
timer also sets the interval
between Off-Hook signaling alerts.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10 seconds)
Call Waiting/Camp-On