NEC UNIVERGE SV8100 Features & Specifications Manual page 635

UNIVERGE SV8100
Program
Number
20-09-02
20-09-03
20-11-11
20-11-14
20-11-21
20-13-23
20-19-04
20-25-14
Operation
None
ISDN Compatibility
Program Name
Class of Service Options
(Incoming Call Service) – Caller
ID Display
Class of Service Options
(Incoming Call Service) – Sub
Address Identification
Class of Service Options (Hold/
Transfer Service) – Auto On-
Hook Transfer
Class of Service Options (Hold/
Transfer Service) – Trunk-to-
Trunk Transfer Restriction
Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
System Options for Caller ID –
Wait Facility IE Timer
ISDN Options – No response
Release Send
Description/Comments
Turns Off (0) or On (1) the Caller
ID display at an extension.
Define whether an extension
displays the Caller Sub-Address, 0
= Deny, 1 = Allow.
In an extensions Class of Service,
turn Off (0) or On (1) an extension
ability to transfer when the user
hangs up.
Turns Off (0) or On (1) the
Trunk-to-Trunk Transfer
Restriction. If enabled,
Trunk-to-Trunk Transfer is not
possible.
Allow (0) an extension user's
ability to set up a tandem call
automatically when they hang up.
Select whether an extension
should display the reason a call is
being transferred to their
extension (Call Forward Busy, Call
Forward No Answer, DND).
This is the time an ISDN trunks
uses to determine how long the
system waits for the Caller ID
name from the Telco.
Operation mode setting for when
second T303 timer expires.
Issue 5.0
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 seconds
(default = 10)
0 = Off
1 = On
(default = 0)
1 - 625