NEC UNIVERGE SV8100 Features & Specifications Manual page 838

Issue 5.0
Related Features
Automatic Route Selection
Central Office Calls, Placing
Last Number Redial
Save Number Dialed
Single Line Telephones
Guide to Feature Programming
Program
Number
15-07-01
20-06-01
20-08-07
21-08-01
21-08-02
1 - 828
Program Name
Programmable Function Keys
Class of Service for Extensions
Class of Service Options
(Outgoing Call Service) – Repeat
Redial
Repeat Dial Setup – Repeat
Redial Count
Repeat Dial Setup – Repeat
Redial Interval Time
Description/Comments
Assign a function key for Repeat
Redial (code 29).
Assign a Class of Service (1~15)
to an extension.
Turns Off (0) or On (1) an
extension to use Repeat Redial.
Set how many times Repeat
Redial automatically repeats if the
call does not go through.
Set the interval between Repeat
Redial attempts.
UNIVERGE SV8100
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~255
(default = 3)
0~64800 (seconds)
(default = 60)
Repeat Redial