NEC UNIVERGE SV8100 Features & Specifications Manual page 977

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
11-11-41
15-07-01
30-03-01
Operation
To set up Tandem Ringing:
1. Press Speaker at the extension considered to be the master telephone (optional).
2. Dial 744
-OR-
Press the Tandem Ringing key (Program 15-07 or SC 851: 80).
3. Dial 1 to set the feature.
4. Enter the extension number to be considered the slave telephone (the telephone that rings when
the master extension rings).
A confirmation tone is heard (if Speaker was used).
5. Press Speaker to hang up (if the key is lit).
While the feature is active, if either the master or slave telephone is on a call, no calls can be
placed or answered at the other extension until the busy telephone has hung up. Multiline
Tandem Ringing
Program Name
Service Code Setup (for Setup/
Entry Operation) – Tandem
Ringing
Programmable Function Keys
DSS Console Key Assignment
Description/Comments
Define a service code to be used
to set up Tandem Ringing.
Assign a function key for Tandem
Ringing (code 80).
Assign a DSS function key for
Tandem Ringing (code 80).
Issue 5.0
Assigned Data
MLT, SLT
(default = 744)
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Key Number
001~500
0~99 (General
Functional Level)
97 = Door Box Access
key (additional data:
1~8 Door Box No.)
* *
00 ~ 99
(Appearance
Functional Level)
1 - 967