NEC UNIVERGE SV8100 Features & Specifications Manual page 708

Issue 5.0
Program
Number
80-01-01
80-01-01
80-03-01
1 - 698
Program Name
Service Tone Setup – Tone 44,
External Dial Tone
Service Tone Setup – Tone 57,
Off-Hook Beep Tone - Headset
Earpiece ringing Tone
DTMF Tone Receiver Setup –
Detect Level
Description/Comments
It is necessary to adjust the DID/
DISA dial tone (tone 44) to a
Repeat Count of 250 (by default,
this is set to 0). The system must
be reset for this change to take
affect.
If required, use this option to
change the tone heard when a
Mobile Extension user goes off
hook to answer a call prior to
pressing *. The system must be
reset for this change to take affect.
Select the Detect Level to be used
for DTMF Tone detection. For the
extension DTMF, this entry must
allow for a detection of -25dBm.
Set the minimum detection level in
Program 80-03-03. The system
must be reset for this change to
take affect.
UNIVERGE SV8100
Assigned Data
0~255 (0 = until
On-Hook)
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
default:
Type 1~5 = 0
Mobile Extension