NEC UNIVERGE SV8100 Features & Specifications Manual page 263

UNIVERGE SV8100
Program
Number
21-01-17
21-02-01
21-15-01
24-02-07
24-02-10
82-08-01
Central Office Calls, Placing
Program Name
System Options for Outgoing
Calls – Restriction Digit in
Outgoing Disable on Incoming
Line
Trunk Group Routing for
Extensions
Individual Trunk Group Routing
for Extensions
System Options for Transfer –
Trunk-to-Trunk Transfer Release
Warning Tone
System Options for Transfer –
Disconnect Trunk to Trunk Timer
Sidetone Volume Setup
Description/Comments
With the Outgoing Disable on
Incoming Line feature, determine
the number of digits (0~9) to be
dialed before the call should be
disconnected.
Assign Program 14-06 routes to
extensions.
Designate the trunk route
accessed when a user dials the
Alternate Trunk Route Access
Code. Refer to Trunk Group
Routing to set up outbound
routing.
Timer starts when a trunk begins
talking with another trunk (for
example: Trunk-to-Trunk Transfer,
outgoing from trunk, Tandem
Trunking). When this time expires,
a warning tone is heard.
Timer starts after the Warning
Tone is heard (24-02-07). When
time expires, the trunk is
disconnected.
Use this program to adjust the
multiline terminal side tone
volume. There are two levels,
based on whether the connected
trunk is a digital trunk or analog
trunk.
Issue 5.0
Assigned Data
Digits 0~9
(default = 4)
0~100
(0 = No Setting)
(default = 1)
0~100
(0 = No Setting)
(default = 0)
0~64800 (seconds)
(default = 1800
seconds)
0~64800 (seconds)
(default = 0 seconds)
0-9
Digital Sidetone Level
0 = -54 (db)
1 = -48 (db)
2 = -42 (db)
3 = -36 (db)
4 = -30 (db)
5 = -24 (db)
6 = -18 (db)
7 = -12 (db)
8 = -12 (db)
9 = -12 (db)
Analog Sidetone Level
0 = -54 (db)
1 = -54 (db)
2 = -54 (db)
3 = -48 (db)
4 = -42 (db)
5 = -36 (db)
6 = -30 (db)
7 = -24 (db)
8 = -18 (db)
9 = -12 (db)
1 - 253