NEC UNIVERGE SV8100 Features & Specifications Manual page 958

Issue 5.0
Program
Number
35-02-18
35-03-01
35-04-01
80-05-01
1 - 948
Program Name
SMDR Output Options – Print
Mode for Caller Name of
Incoming Call
SMDR Port Assignment for
Trunk Group
SMDR Port Assignment for
Department Groups
Date Format for SMDR and
System – Date Format
Description/Comments
Select whether to display up to 16
characters of the Caller Name on
the same line as the call record (0)
or if a line feed should be added
and up to 24 characters of the
Caller Name will be displayed on
the following line (1). If the line
feed option is selected, the Caller
Name is displayed on the next line
as : NEXT Caller Name. The
default entry for this option is 0.
This setting works regardless of
the setting in Program 35-02-15.
. With this option set to 1, if
your communications
program (such as
HyperTerminal) has the line
wrap option enabled in the
ASCII setup, an additional
line break may appear above
the Caller name line.
Assign the SMDR port for each
trunk group. For each Trunk
Group, select the SMDR port to
which the incoming SMDR
information should be sent.
Assign the SMDR port for each
Department Group. For each
Department Group, select the
SMDR port to which the outgoing
SMDR information should be sent.
Set the date format for SMDR.
Station Message Detail Recording
UNIVERGE SV8100
Assigned Data
0 = Normal
1 = Line Feed
(default = 0)
Trunk Groups: 1~100
SMDR Ports: 1~8
(default = 1)
Department Groups:
1~64
SMDR Ports: 1~8
(default = 1)
0 = American Format
(Month / Day / Year)
1 = Japanese Format
(Year / Month / Day)
2 = European Format
(Day / Month / Year)
(default = 0)