NEC UNIVERGE SV8100 Features & Specifications Manual page 664

Issue 5.0
Programmable Function Keys
Guide to Feature Programming
Program
Number
15-07-01
20-06-01
20-10-06
31-01-04
.
For additional programming for Paging, refer to the Paging External and Paging Internal features.
Operation
Meet Me External Conference
To make a Meet Me External Conference:
Multiline Terminal
1. While on a call, press Conf softkey.
2. Dial 751 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
1 - 654
Program Name
Programmable Function Keys
Class of Service for Extensions
Class of Service Options
(Answer Service) – Meet-Me
Conference and Paging
System Options for Internal/
External Paging – Privacy
Release Time
Description/Comments
Assign function keys for
Conference (code 07).
Assign a Class of Service (1~15)
to an extension.
Turns Off (0) or On (1) an
extension to use Meet-Me
Conference and Paging.
Set the Privacy Release Time.
After the user initiates Meet Me
Conference, the system waits this
interval for the Paged party to join
the conversation.
UNIVERGE SV8100
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64800 (seconds)
(default = 90 seconds)
Meet Me Conference