NEC UNIVERGE SV8100 Features & Specifications Manual page 723

UNIVERGE SV8100
Program
Number
80-01-04
When Using a PGD(2)-U10 ADP:
Program
Number
10-03-01
11-06-01
11-08-01
33-01-01
Music on Hold
Program Name
Gain Level (dB)
Program Name
ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
ACI Extension Numbering
ACI Group Pilot Number
ACI Port Type Setup
Description/Comments
Used to customize the Gain Level
for the musing on hold tone if
Program 10-01-01 is set to 2.
Description/Comments
If a PGD(2)-U10 ADP is used for
the external music source, the
module is automatically assigned
type 9 if the jumper straps in the
module were set prior to
connecting it to the system. If
another type was assigned,
disconnect the PGD(2)-U10 ADP
from the system, delete the type
setting, and, with the jumper
straps positioned correctly in the
PGD(2)-U10 ADP, reconnect the
module to the system. Refer to
the UNIVERGE SV8100 System
Hardware Manual for the jumper
strap settings.
Each ACI port must be assigned
an extension number. Use this
program to assign the extension
numbers to ACI software ports.
Select a number outside of the
normal extension number range.
Assign pilot numbers to ACI
groups. When a user dials the pilot
number, they reach an available
ACI software port within the group.
Set each ACI software ports for
input (1) or input/output (2). Use
input ports for Music on Hold
sources. Use output ports for
External Paging/Ringer Control.
Issue 5.0
Assigned Data
1~63 (-15.5 ~ +15.5)
Assigned Data
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
ACI Ports: 1~96
(default not assigned)
ACI Groups: 1~16
(default not assigned)
ACI Ports: 1~96
ACI Types:
0 = None
1 = MOH/BGM (Input)
2 = External Audio
Port (Input/Output
(default = 2)
1 - 713