NEC UNIVERGE SV8100 Features & Specifications Manual page 809

UNIVERGE SV8100
Guide to Feature Programming
Program
Number
14-01-09
14-07-01
15-06-01
Private Line
Program Name
Basic Trunk Data Setup – Private
Line
Trunk Access Map Setup – Trunk
Port Number
Trunk Access Map for
Extensions
Description/Comments
Determine if a trunk should be
used as a normal (0) or private (1)
line.
A Private Line reserves a
trunk for a multiline terminal
for placing and answering
calls. A user with a Private
Line always knows when
important calls are for them.
Additionally, the user has
their own trunk for placing
calls that is not available to
others in the system.
Assign Private Line to the Private
Line Access Map (refer to
Program 15-06 in this section).
Use option 5 for Incoming, option
7 for Both Ways and option 4 for
Outgoing. In all other Access
Maps, assign option 3 to the
Private Line.
Assign extension to have Private
Line to an unused Private Line
Access Map.
Issue 5.0
Assigned Data
0 = Disable Private
Line (Normal)
1 = Enable Private Line
(Private Line)
(default = 0)
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
Trunks 1~200
(default = 1)
1 - 799