NEC UNIVERGE SV8100 Features & Specifications Manual page 982

Issue 5.0
Related Features
Call Forwarding, Off-Premise
Central Office Calls, Answering
Central Office Calls, Placing
Direct Inward System Access (DISA)
Guide to Feature Programming
Method A – Tandem Trunking from Conference
Program
Number
11-12-57
14-01-04
14-01-05
14-01-13
15-07-01
20-06-01
1 - 972
Program Name
Service Code Setup (for Service
Access) – Tandem Trunking
Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
Basic Trunk Data Setup –
Receive Gain Level for
Conference and Transfer Calls
Basic Trunk Data Setup – Trunk-
to-Trunk Transfer
Programmable Function Keys
Class of Service for Extensions
Description/Comments
If the default service code (753) for
Tandem Trunking is not
acceptable, change the code as
required.
Select the Transmit CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
Select the Receive CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
For each trunk that should be able
to participate in a tandem call,
enter 1.
(Optional) Assign a function key
for Transfer (code 06).
Assign a Class of Service (1~15)
to an extension.
Tandem Trunking (Unsupervised Conference)
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default = 753)
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 16 (-8dB)]
0 = Disable
1 = Enable
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1