NEC UNIVERGE SV8100 Features & Specifications Manual page 759

UNIVERGE SV8100
Program
Number
15-03-08
15-03-09
15-03-10
15-03-11
15-03-14
20-03-01
20-03-02
(OPX) Off-Premise Extension
Program Name
Single Line Telephone Basic
Data Setup – Answer On-Hook
when Holding (SLT)
Single Line Telephone Basic
Data Setup – Caller ID Function -
For External Module
Single Line Telephone Basic
Data Setup – Caller ID Name
Single Line Telephone Basic
Data Setup – Caller ID Type
Single Line Telephone Basic
Data Setup – Forwarded Caller ID
Display Mode
System Options for Single Line
Telephones – SLT Call Waiting
Answer Mode
System Options for Single Line
Telephones – Ignore Received
DP Dial on DTMF SLT Port
Description/Comments
Used to enable or disable Answer
On-Hook when Holding for SLT.
Enable (1) or disable (0) the Caller
ID FSK signal for an external
Caller ID module or a 3rd party
vendor telephone with Caller ID
display.
Important:
If voice mail is used, this setting
must be disabled for the system
integration codes to be correct.
. With a 2500 set (no Caller ID)
installed, this must be set to 0
for incoming callers to have a
talk path.
Determine if an extension user
telephone should display the
Caller ID name.
Determine whether the Caller ID
type is FSK or DTMF.
Determine what the display shows
when a multiline terminal receives
a forwarded outside call.
For a busy single line telephone,
set the mode used to answer a
camped-on trunk call.
For ESL sets, enabling this option
(1) allows the user to dial Service
Code for Voice Mail Conversation
Record.
Use this option to define whether
the system should receive dial
pulse and DTMF signals (0) or
ignore dial pulse and only accept
DTMF signals (1).
Issue 5.0
Assigned Data
0 = Disable
(No)
1 = Yes
(Enable)
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = FSK
1 = DTMF
(default = 0)
0 = Calling Extension
Number (Calling)
1 = External Caller ID
(Forward)
(default = 0)
0 = Hookflash
(Hooking)
1 = Hookflash +
Service Code 754
(default = 0)
0 = Do Not Ignore (No)
1 = Ignore (Yes)
(default = 0)
1 - 749