NEC UNIVERGE SV8100 Features & Specifications Manual page 300

Issue 5.0
Program
Number
21-06-02
21-06-03
21-06-04
21-06-05
21-06-06
21-06-07
21-06-08
21-21-01
34-01-05
34-08-01
1 - 290
Program Name
Toll Restriction Table Data Setup
– International Call Permit Code
Table
Toll Restriction Table Data Setup
– Maximum Number of Digits
Table Assignment
Toll Restriction Table Data Setup
– Common Permit Code Table
Toll Restriction Table Data Setup
– Common Restriction Table
Toll Restriction Table Data Setup
– Permit Code Table
Toll Restriction Table Data Setup
– Deny Restriction Table
Toll Restriction Table Data Setup
– PBX Access Code
Toll Restriction for Trunks
(Seized Trunk Basis Setting) –
Restriction Class
E&M Tie Line Basic Setup –
System Toll Restriction
Toll Restriction Data for E&M Tie
Lines
Description/Comments
Enter the international dialing
codes you want to permit.
Select the maximum number of
digits allowed in outgoing calls for
each table (4~30).
Program codes into the Common
Permit Code Table.
Program codes into the Common
Restrict Code Table.
Program codes into the Permit
Code Tables.
Program codes into the Restrict
Code Tables (200 codes per table
maximum).
The system allows up to four
tables for PBX access codes.
PBX Access Codes can have up
# *
to two digits, using 0~9, ,
LINE KEY 1 (don't care). Refer to
the PBX Compatibility feature for
the specifics.
Enter the Toll Restriction Class for
the selected trunk.
Determine if an incoming Tie Line
call should be subject to Toll
Restriction.
Define the Toll Restriction data for
E&M Tie Lines. This data should
be defined if Tie Line Code
Restriction is enabled in Program
21-05-13.
UNIVERGE SV8100
Assigned Data
Dial (Up to six digits)
Default:
Tables 1~20 = No
Setting
4-30
default:
Tables 1~ 4 = 30
Dial (Up to four digits)
default:
Table 1 ~ 10 = No
Setting
Dial (Up to 12 digits)
default:
Tables 1~ 10 = No
Setting
Dial (Up to 12 digits)
default:
Table 1~4 = No Setting
Dial (Up to 12 digits)
default:
Table 1~4 = No Setting
Dial (Up to two digits)
default:
Table 1~4 = No Setting
and
1~15
(default = 1)
0 = No (Off)
1 = Yes (On)
(default = 0)
Up to 10 digits
*
#
(0~9, , )
(default not assigned)
Code Restriction