NEC UNIVERGE SV8100 Features & Specifications Manual page 248

Issue 5.0
Program
Number
20-10-07
20-13-13
20-13-23
21-01-15
21-01-16
21-01-17
22-01-01
22-01-02
22-01-03
22-01-04
1 - 238
Program Name
Class of Service Options
(Answer Service) – Automatic
Off-Hook Answer
Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
System Options for Outgoing
Calls – Outgoing Disable on
Incoming Line (Toll Restriction)
System Options for Outgoing
Calls – Supervise Dial Detection
Timer
System Options for Outgoing
Calls – Restriction Digit in
Outgoing Disable on Incoming
Line
System Options for Incoming
Calls – Incoming Call Priority
System Options for Incoming
Calls – Incoming Call Ring No
Answer Alarm
System Options for Incoming
Calls – Ring No Answer Alarm
Time
System Options for Incoming
Calls – DIL No Answer Recall
Time
Description/Comments
Turns Off (0) or On (1) an
extension to use Universal Auto
Answer (no service code
required).
Turn Off (0) or On (1) the
extension ability to use Continued
Dialing, which allows DTMF signal
sending while talking on
extension.
Select whether an extension
should display the reason a call is
being transferred to their
extension (Call Forward Busy, Call
Forward No Answer, DND).
Enable (1) or disable (0) the
Outgoing Disable on Incoming
Line feature.
With the Outgoing Disable on
Incoming Line feature, if dial tone
is not detected after the extension
answers an incoming line, the
system determines the call is
unable to complete and releases
the DTMF receiver.
With the Outgoing Disable on
Incoming Line feature, determine
the number of digits (0~9) to be
dialed before the call should be
disconnected.
Use this option to determine if
Intercom calls or trunk calls have
answer priority when both are
ringing simultaneously.
Enable (1) or disable (0) the
Incoming Call RNA Alarm. If
enabled, the ring cadence will
change for a call that rings longer
than the interval set in Program
22-01-03.
Set the Ring No Answer Alarm
interval. If a trunk rings a multiline
terminal longer than this interval,
the system changes the ring
cadence.
A DIL that rings its programmed
destination longer than this
interval diverts to the DIL No
Answer Ring Group (set in
Program 22-08).
Central Office Calls, Answering
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Disable
1 = Enable
(default = 0)
0~64800 (seconds)
(default = 20 seconds)
Digits 0~9
(default = 4)
0 = Intercom call
priority
1 = Trunk call priority
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0~64800 (seconds)
(default = 60 seconds)
0~64800 (seconds)
(default = 0 seconds)