Siemens SINUMERIK 828D Programming Manual page 722

Tables
16.1 Instructions
Operation Meaning
DELDL Delete additive offsets
DELDTG Deletion of distance-to-go
DELETE Delete the specified file. The file name
can be specified with path and file
identifier.
DELTOOLENV Delete data records describing tool
environments
DIACYCOFA Axis-specific modal diameter
programming: OFF in cycles
DIAM90 Diameter programming for G90, radius
programming for G91
DIAM90A Axis-specific modal diameter
programming for G90 and AC, radius
programming for G91 and IC
DIAMCHAN Transfer of all axes from MD axis
functions to diameter programming
channel status
DIAMCHANA Transfer of the diameter programming
channel status
DIAMCYCOF Channel-specific diameter programming:
OFF in cycles
DIAMOF Diameter programming: OFF
3)
Normal position, see machine
manufacturer
DIAMOFA Axis-specific modal diameter
programming: OFF
Normal position, see machine
manufacturer
DIAMON Diameter programming: ON
DIAMONA Axis-specific modal diameter
programming: ON
Activation, see machine manufacturer
DIC Relative non-modal axis-specific
diameter programming
DILF Retraction path (length)
DISABLE Interrupt OFF
DISC Transition circle overshoot tool radius
compensation
DISCL Clearance between the end point of the
fast infeed motion and the machining
plane
722
W Description see
1) 2)
PGAsl
Delete additive offsets (DELDL) (Page 395)
PGAsl
Delete distance-to-go (DELDTG) (Page 579)
PGAsl
Delete file (DELETE) (Page 136)
FB1(W1)
FB1(P1)
m
PGAsl
m
PGsl
m
PGsl
PGsl
FB1(P1)
m
PGsl
m
PGsl
m
PGsl
m
PGsl
m
PGsl
s
PGsl
m
PGAsl
Deactivating/reactivating the assignment of an
interrupt routine (DISABLE, ENABLE) (Page 116)
PGsl
m
PGsl
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning