Free Assignment Of D Numbers: Invalidate D Numbers (Dzero) - Siemens SINUMERIK 828D Programming Manual

Significance
Dno
Tno
status
7.7.5

Free assignment of D numbers: Invalidate D numbers (DZERO)

Function
The
with this command are no longer verified by the
accessed again by setting the D number once more with
Syntax
DZERO
Significance
DZERO
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
D number for which the T number shall be searched.
T number found
Value:
0
-1
-2
-5
command is used for support during retooling. Compensation data sets tagged
DZERO
Marks all D numbers of the TO unit as invalid.
7.7 Free assignment of D numbers, cutting edge numbers
Significance:
The T number has been found. Tno contains the value of the T
number.
No T number exists for the specified D number; Tno=0.
The D number is not absolute. Tno receives the value of the first
found tool, that contains the D number with the value Dno.
The function was not able to be executed for another reason.
CHKDNO
command. These data sets can be
.
SETDNO
Tool offsets
433