Siemens SINUMERIK 828D Programming Manual page 726

Tables
16.1 Instructions
Operation Meaning
FD Path feedrate for handwheel override
FDA Axis feedrate for handwheel override
FENDNORM Corner deceleration OFF
FFWOF Feedforward control OFF
3)
FFWON Feedforward control ON
FGREF Reference radius for rotary axes or path
reference factors for orientation axes
(vector interpolation)
FGROUP Definition of axis/axes with path feedrate
FI Parameter for access to frame data:
Fine offset
FIFOCTRL Control of preprocessing buffer
FILEDATE Returns date of most recent write
access to file
FILEINFO Returns summary information listing
FILEDATE, FILESIZE, FILESTAT, and
FILETIME
FILESIZE Returns current file size
FILESTAT Returns file status of rights for read,
write, execute, display, delete (rwxsd)
FILETIME Returns time of most recent write
access to file
FINEA End of motion when "Exact stop fine"
reached
FL Limit velocity for synchronized axis
726
W Description see
1) 2)
PGsl
s
PGsl
s
PGAsl
m
Feed reduction with corner deceleration
(FENDNORM, G62, G621) (Page 273)
PGsl
m
PGsl
m
PGsl
m
PGsl
PGAsl
Reading and changing frame components (TR, FI, RT,
SC, MI) (Page 290)
PGAsl
m
Program sequence with preprocessing memory
(STOPFIFO, STARTFIFO, FIFOCTRL, STOPRE)
(Page 464)
PGAsl
Read out file information (FILEDATE, FILETIME,
FILESIZE, FILESTAT, FILEINFO) (Page 143)
PGAsl
Read out file information (FILEDATE, FILETIME,
FILESIZE, FILESTAT, FILEINFO) (Page 143)
PGAsl
Read out file information (FILEDATE, FILETIME,
FILESIZE, FILESTAT, FILEINFO) (Page 143)
PGAsl
Read out file information (FILEDATE, FILETIME,
FILESIZE, FILESTAT, FILEINFO) (Page 143)
PGAsl
Read out file information (FILEDATE, FILETIME,
FILESIZE, FILESTAT, FILEINFO) (Page 143)
PGAsl
m
Programmed end-of-motion criterion (FINEA,
COARSEA, IPOENDA, IPOBRKA, ADISPOSA)
(Page 274)
PGsl
m
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning