Siemens SINUMERIK 828D Programming Manual page 748

Tables
16.1 Instructions
Operation Meaning
RTLIOF G0 without linear interpolation (single-
axis interpolation)
RTLION G0 with linear interpolation
S Spindle speed
(with G4, G96/G961 different
significance)
SAVE Attribute for saving information when
subprograms are called
SBLOF Suppress single block
SBLON Revoke suppression of single block
SC Parameter for access to frame data:
Scaling
SCALE Programmable scaling
SCC Selective assignment of transverse axis
to G96/G961/G962. Axis identifiers may
take the form of geometry, channel or
machine axes
SCPARA Program servo parameter set
SD Spline degree
SEFORM Structuring operation in the Step editor
to generate the step view for HMI
Advanced
SET Keyword for initialization of all elements
of an array with listed values
SETAL Set alarm
SETDNO Assign the D number of a cutting edge
(CE) of a tool (T)
SETINT Define which interrupt routine is to be
activated when an NCK input is present
748
W Description see
1) 2)
PGsl
m
PGsl
m
PGsl
m/s
PGAsl
Save modal G functions (SAVE) (Page 161)
PGAsl
Suppress single block execution (SBLOF, SBLON)
(Page 162)
PGAsl
Suppress single block execution (SBLOF, SBLON)
(Page 162)
PGAsl
Reading and changing frame components (TR, FI, RT,
SC, MI) (Page 290)
PGsl
s
PGsl
PGAsl
Programmable servo parameter set (SCPARA)
(Page 278)
PGAsl
s
Spline interpolation (ASPLINE, BSPLINE, CSPLINE,
BAUTO, BNAT, BTAN, EAUTO, ENAT, ETAN, PW, SD,
PL) (Page 234)
PGAsl
Structuring instruction in step editor (SEFORM)
(Page 215)
PGAsl
Definition and initialization of array variables (DEF,
SET, REP) (Page 46)
PGAsl
Alarms (SETAL) (Page 688)
PGAsl
Free assignment of D numbers: Rename D numbers
(GETDNO, SETDNO) (Page 431)
PGAsl
Assign and start interrupt routine (SETINT, PRIO,
BLSYNC) (Page 114)
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning