Siemens SINUMERIK 828D Programming Manual page 376

Transformations
6.8 Kinematic transformation
Syntax
G07
G05
The commands
can be programmed and displayed in the Cartesian coordinate system. Tool compensation
and zero offset are included in Cartesian coordinates. After the angle for the inclined axis is
programmed in the NC program, the starting position can be approached (
oblique plunge-cutting (
Significance
G07
G05
Example
Programming
N.. G18
N50 G07 X70 Z40 F4000
N60 G05 X70 F100
N70 ...
376
are used to make it easier to program the inclined axes. Positions
G07/G05
) performed.
G05
Approach starting position
Activates oblique plunge-cutting
; Program angle for inclined axis
; Approach starting position
; Oblique plunge-cutting
;
Comments
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
) and then the
G07
Job planning