Siemens SINUMERIK 828D Programming Manual page 736

Tables
16.1 Instructions
Operation Meaning
LEADOF Master value coupling OFF
LEADON Master value coupling ON
LENTOAX Provides information about the
assignment of tool lengths L1, L2, and
L3 of the active tool to the abscissa,
ordinate and applicate
LFOF Fast retraction for thread cutting OFF
3)
LFON Fast retraction for thread cutting ON
LFPOS Retraction of the axis declared with
POLFMASK or POLFMLIN to the
absolute axis position programmed with
POLF
LFTXT The plane of the retraction movement
for fast retraction is determined from
the path tangent and the current tool
direction
LFWP The plane of the retraction movement
for fast retraction is determined by the
current working plane (G17/G18/G19)
LIFTFAST Fast retraction
LIMS Speed limitation
for G96/G961 and G97
LLI Lower limit value of variables
LN Natural logarithm
LOCK Disable synchronized action with ID
(stop technology cycle)
LONGHOLE Milling pattern cycle of elongated holes
on a circle
LOOP Introduction of an endless loop
M0 Programmed stop
M1 Optional stop
736
W Description see
1) 2)
PGAsl
Axial leading value coupling (LEADON, LEADOF)
(Page 520)
PGAsl
Axial leading value coupling (LEADON, LEADOF)
(Page 520)
FB1(W1)
PGsl
m
PGsl
m
PGsl
m
PGsl
m
PGsl
m
PGsl
Fast retraction from the contour (SETINT LIFTFAST,
ALF) (Page 118)
PGsl
m
PGAsl
Attribute: Limit values (LLI, ULI) (Page 36)
PGAsl
Arithmetic functions (Page 63)
PGAsl
Lock, unlock, reset (LOCK, UNLOCK, RESET)
(Page 627)
BHDsl/BHFsl
PGAsl
Continuous program loop (LOOP, ENDLOOP)
(Page 101)
PGsl
PGsl
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning