Siemens SINUMERIK 828D Programming Manual page 742

Tables
16.1 Instructions
Operation Meaning
ORIVIRT2 Orientation angle via virtual orientation
axes (definition 1)
ORIWKS Tool orientation in the workpiece
3)
coordinate system
OS Oscillation on/off
OSB Oscillating: Starting point
OSC Continuous tool orientation smoothing
OSCILL Axis: 1 - 3 infeed axes
OSCTRL Oscillation options
OSD Smoothing of tool orientation by
specifying smoothing distance with SD
OSE Oscillation end position
OSNSC Oscillating: Number of spark-out cycles
OSOF Tool orientation smoothing OFF
3)
OSP1 Oscillating: Left reversal point
OSP2 Oscillation right reversal point
OSS Tool orientation smoothing at end of
block
OSSE Tool orientation smoothing at start and
end of block
742
W Description see
1) 2)
PGAsl
m
Programming orientation axes (ORIAXES, ORIVECT,
ORIEULER, ORIRPY, ORIRPY2, ORIVIRT1,
ORIVIRT2) (Page 333)
PGAsl
m
Orientation axis reference (ORIWKS, ORIMKS)
(Page 331)
PGAsl
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) (Page 633)
FB2(P5)
m
PGAsl
m
Tool orientation (ORIC, ORID, OSOF, OSC, OSS,
OSSE, ORIS, OSD, OST) (Page 423)
PGAsl
m
Oscillation controlled by synchronized actions (OSCILL)
(Page 639)
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) (Page 633)
PGAsl
m
Tool orientation (ORIC, ORID, OSOF, OSC, OSS,
OSSE, ORIS, OSD, OST) (Page 423)
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) (Page 633)
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) (Page 633)
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) (Page 633)
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) (Page 633)
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) (Page 633)
PGAsl
m
Tool orientation (ORIC, ORID, OSOF, OSC, OSS,
OSSE, ORIS, OSD, OST) (Page 423)
PGAsl
m
Tool orientation (ORIC, ORID, OSOF, OSC, OSS,
OSSE, ORIS, OSD, OST) (Page 423)
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning