Structuring Instruction In Step Editor (Seform) - Siemens SINUMERIK 828D Programming Manual

2.3

Structuring instruction in step editor (SEFORM)

Function
The structuring instruction
support) to generate the step view for HMI Advanced. The step view is used to improve the
readability of the NC subprogram.
Syntax
SEFORM(<section name>,<level>,<icon>)
Significance
SEFORM()
<section name>
<level>
<icon>
Note
SEFORM
The string transferred with the
in the OPI variable in a similar way to the
overwritten by the next
The NCK checks during the part program execution the parameters
does not process them any further.
References
For additional information on editor-based program support, see:
Operating Manual HMI Advanced.
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
SEFORM
Function call of the structuring instruction with parameters
<section name>
Identifier of the working step
Type:
Index for the main or sub-level
Type:
Value:
Name of the icon displayed for this section.
Type:
instructions are generated in the Step editor.
SEFORM
2.3 Structuring instruction in step editor (SEFORM)
is evaluated in the step editor (editor-based program
, and
<level>
STRING
INT
0 Main level
1, ..., <n> Lower level 1, ... , lower level <n>
STRING
parameter is stored main-run-synchronously
<section name>
instruction. The information remains until
MSG
instruction. Reset and end of part program clear the content.
File and Program Management
<icon>
and
<level>
but
<icon>
215