Display Mobility-Domain Config - 3Com WX4400 Command Reference Manual

display
mobility-domain
config
Usage — This command has no effect if the WX switch member is not
configured as part of a Mobility Domain or the current WX switch is not
the seed.
Examples — The following command clears a Mobility Domain member
with the IP address 192.168.0.1:
WX1200# clear mobility-domain member 192.168.0.1
See Also
set mobility-domain member on page 273
Displays the configuration of the Mobility Domain.
Syntax —

display mobility-domain config

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the Mobility Domain
configuration:
WX4400# display mobility-domain config
This WX is a member, with seed 192.168.14.6
See Also
clear mobility-domain on page 270
set mobility-domain member on page 273
display mobility-domain status on page 272
display mobility-domain config 271