Display Vlan Config - 3Com WX4400 Command Reference Manual

display vlan config

WX1200# display vlan config burgundy
VLAN Name
---- ---------------- ------ ----- ----- ---------------- ----- -----
2 burgundy
4094 web-aaa
Table 24 Output for display tunnel (continued)
Field
Remote Address
State
Port
LVID
RVID
See Also
display vlan config on page 115
Shows VLAN information.
Syntax — display vlan config [vlan-id]
vlan-id — VLAN name or number. If you do not specify a VLAN,
information for all VLANs is displayed.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays information for VLAN
burgundy:
Admin VLAN Tunl
Status State Affin Port
Up Up
Up Up
Description
IP address of the remote end of the tunnel. This is the
system IP address of another WX switch in the mobility
domain.
Tunnel state:
Up
Dormant
Tunnel port ID.
Local VLAN ID.
Remote VLAN ID.
5
2
3
4
6
0
2
t:10.10.40.4
display vlan config
Port
Tag State
none Up
none Up
none Up
none Up
4094 Up
none Up
115