3Com WX4400 Command Reference Manual page 387

Table 67 Defaults for Service Profile Parameters (continued)
Parameter
long-retry-count
no-broadcast
proxy-arp
psk-phrase
psk-raw
rsn-ie
shared-key-auth
short-retry-count
soda
ssid-name
ssid-type
static-cos
tkip-mc-time
set radio-profile service-profile
Radio Behavior When Parameter Set
Default Value to Default Value
5 Sends a long unicast frame up to five
times without acknowledgment.
disable Does not reduce wireless broadcast traffic
by sending unicasts to clients for ARP
requests, DHCP Offers, and Acks instead
of forwarding them as multicasts.
disable Does not reply on behalf of wireless
clients to ARP requests for client IP
addresses. Instead, the radio forwards the
ARP Requests as wireless broadcasts.
No passphrase Uses dynamically generated keys rather
defined than statically configured keys to
authenticate WPA clients.
No preshared Uses dynamically generated keys rather
key defined than statically configured keys to
authenticate WPA clients.
disable Does not use the RSN IE in transmitted
frames.
disable Does not use shared-key authentication.
This parameter does not enable PSK
authentication for WPA. To enable PSK
encryption for WPA, use the
set radio-profile auth-psk command.
5 Sends a short unicast frame up to five
times without acknowledgment.
disable Sygate On Demand Agent (SODA) files
are not downloaded to connecting clients.
private Uses the SSID name private.
crypto Encrypts wireless traffic for the SSID.
disable Assigns CoS based on the QoS mode
(wmm or svp) or based on ACLs.
60000 Uses Michael countermeasures for 60,000
ms (60 seconds) following detection of a
second MIC failure within 60 seconds.
387