3Com WX4400 Command Reference Manual page 596

596 C 19: RF D
HAPTER
C
ETECTION OMMANDS
Table 100 display rfdetect mobility-domain ssid or bssid Output (continued)
Field
Adhoc
Crypto-Types
WX-IPaddress
Port/Radio/Channel
Mac
Device-type
Adhoc
Crypto-Types
RSSI
SSID
See Also
display rfdetect data on page 590
display rfdetect visible on page 598
Description
Indicates whether the rogue is an infrastructure rogue (is
using an AP) or is operating in ad-hoc mode.
Encryption type:
clear (no encryption)
ccmp
tkip
wep104 (WPA 104-bit WEP)
wep40 (WPA 40-bit WEP)
wep (non-WPA WEP)
System IP address of the WX switch that detected the rogue.
Port number, radio number, and channel number of the radio
that detected the rogue. For a Distributed MAP, the
connection number is labeled dap. (This stands for distributed
ap.)
MAC address of the radio that detected the rogue.
Device type detected by the MAP radio.
Ad-hoc status (yes or no) detected by the MAP radio.
Encryption type detected by the MAP radio.
Received signal strength indication (RSSI)—the strength of the
RF signal detected by the MAP radio, in decibels referred to
1 milliwatt (dBm).
SSID mapped to the BSSID.