3Com WX4400 Command Reference Manual page 145

Wireless lan switch and controller
Hide thumbs Also See for WX4400:
Table of Contents

Advertisement

Default Gateway:
DNS Servers:
DNS Domain Name:
Table 30 and Table 31 describe the fields in these displays.
Table 30 Output for display dhcp-server
Field
Description
VLAN
VLAN number
Name
VLAN name
Address
IP address leased by the server.
MAC Address
MAC address of the device that holds the least for the address.
Lease Remaining Number of seconds remaining before the address lease expires.
Table 31 Output for display dhcp-server verbose
Field
Description
Interface
VLAN name and number.
Status
Status of the interface:
UP
DOWN
Address Range
Range from which the server can lease addresses.
Hardware Address MAC address of the DHCP client.
Lease Remaining Number of seconds remaining before the address lease expires.
State
State of the address lease:
SUSPEND—MSS is checking for the presence of another
DHCP server on the subnet. This is the initial state of the MSS
DHCP server. The MSS DHCP server remains in this state if
another DHCP server is detected.
CHECKING—MSS is using ARP to verify whether the address
is available.
OFFERING—MSS offered the address to the client and is
waiting for the client to send a DHCPREQUEST for the address.
BOUND—The client accepted the address.
HOLDING—The address is already in use and is therefore
unavailable.
Lease Allocation Duration of the address lease, in seconds.
Lease Remaining Number of seconds remaining before the address lease expires.
display dhcp-server
10.10.20.1
10.10.20.4 10.10.20.5
mycorp.com
145

Advertisement

Table of Contents
loading

Table of Contents