Display Fdb Count - 3Com WX4400 Command Reference Manual

display fdb count

See Also
set fdb agingtime on page 118
Lists the number of entries in the forwarding database.
Syntax —
display fdb count {perm | static | dynamic}
[vlan vlan-id]
— Lists the number of permanent entries. A permanent entry
perm
does not age out and remains in the database even after a reboot,
reset, or power cycle.
static — Lists the number of static entries. A static entry does not
age out, but is removed from the database after a reboot, reset, or
power cycle.
— Lists the number of dynamic entries. A dynamic entry is
dynamic
automatically removed through aging or after a reboot, reset, or
power cycle.
vlan vlan-id — VLAN name or number. Entries are listed for only the
specified VLAN.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
The following command lists the number of dynamic entries that the
forwarding database contains:
WX1200# display fdb count dynamic
Total Matching Entries = 2
See Also
display fdb on page 106
display fdb count 109