Set License - 3Com WX4400 Command Reference Manual

set license

Installs an upgrade license, for managing more MAPs.
Syntax —
set license license-key activation-key
— License key, starting with WXL. You can enter the
license-key
key with or without the hyphens.
activation-key
the key with or without the hyphens.
Defaults — The WX4400 can boot and manage 24 MAPs by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — The license key is shipped with the switch. To obtain the
activation key, access the 3Com web site. Each license and activation key
pair allows the switch to actively manage an additional 24 MAPs. You can
install up to three upgrade license and activation key pairs, to actively
manage up to 96 MAPs.
Examples — To install an upgrade license and activation key, type the
following command:
WX4400# set license WXL-076E-93E9-62DA-54D8
WXA-3E04-4CC2-430D-B508
Serial Number
License Number
License Key
Activation key
Feature
Expires
48 ports are enabled
success: license was installed
The additional ports refers to the number of additional MAPs the switch
can boot and actively manage.
See Also
display license on page 44
— Activation key, starting with WXA. You can enter
: M8XE4IBB8DB10
: 245
: WXL-076E-93E9-62DA-54D8
: WXA-3E04-4CC2-430D-B508
: 24 additional ports
: Never
set license 55