Display Port Mirror - 3Com WX4400 Command Reference Manual

display port mirror

Examples — The following command displays the configuration of port
group server2:
WX1200# display port-group name server2
Port group: server2 is up
Ports: 5, 7
Table 11 describes the fields in the display port-group output.
Table 11 Output for display port-group
Field
Port group
Ports
See Also
clear port-group on page 69
set port-group on page 88
Displays the port mirroring configuration.
Syntax — show port mirror
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 4.2.
Examples — The following command displays the port mirroring
configuration on the switch:
WX4400# display port mirror
Port 1 is mirrored to port 2
If port mirroring is not configured, the message in the following example
is displayed instead:
WX4400# display port mirror
No ports are mirrored
Description
Name and state (enabled or disabled) of the port
group.
Ports contained in the port group.
display port mirror 75