Set Ip Alias; Set Ip Dns - 3Com WX4400 Command Reference Manual

168 C 7: IP S
HAPTER

set ip alias

set ip dns

C
ERVICES OMMANDS
Configures an alias, which maps a name to an IP address. You can use
aliases as shortcuts in CLI commands.
Syntax —
set ip alias name ip-addr
— String of up to 32 alphanumeric characters, with no spaces.
name
— IP address in dotted decimal notation.
ip-addr
Defaults — None.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command configures the alias HR1 for IP
address 192.168.1.2:
WX4400# set ip alias HR1 192.168.1.2
success: change accepted.
See Also
clear ip alias on page 132
display ip alias on page 147
Enables or disables DNS on a wireless LAN switch.
Syntax —
set ip dns {enable | disable}
— Enables DNS.
enable
— Disables DNS.
disable
Defaults — DNS is disabled by default.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command enables DNS on a WX switch:
WX1200# set ip dns enable
Start DNS Client