Clear Dap - 3Com WX4400 Command Reference Manual

68 C 4: P
HAPTER ORT

clear dap

C
OMMANDS
Table 9 Port Commands by Usage (continued)
Type
Port Groups
Port Mirroring
Statistics
Removes a Distributed MAP.
CAUTION: When you clear a Distributed MAP, MSS ends user sessions
that are using the MAP.
Syntax — clear dap dap-num
dap-num — Number of the Distributed MAP(s) you want to remove.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command clears Distributed MAP 1:
WX4400# clear dap 1
This will clear specified DAP devices.
Would you like to continue? (y/n) [n]y
See Also
set dap on page 85
set port type ap on page 95
Command
set port-group on page 88
display port-group on page 74
clear port-group on page 69
display port mirror on page 75
clear port mirror on page 71
set port mirror on page 90
display port counters on page 73
monitor port counters on page 80
clear port counters on page 69