set confirm
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Type a caret (^), then the message, then another caret.
Do not use the following characters with commands in which you set text
to be displayed on the WX switch, such as message-of-the-day (MOTD)
banners:
Ampersand (&)
Angle brackets (< >)
Double quotation marks ("")
Number sign (#)
Question mark (?)
Single quotation mark (')
Examples — To create a banner that says Update meeting at 3 p.m.,
type the following command:
WX4400# set banner motd ^Update meeting at 3 p.m.^
success: change accepted.
See Also
clear banner motd on page 40
display banner motd on page 43
Enables or disables the display of confirmation messages for commands
that might have a large impact on the network.
Syntax —
set confirm {on | off}
on
— Enables confirmation messages.
off
— Disables confirmation messages.
Defaults — Configuration messages are enabled.
Access — Enabled.
History — Introduced in MSS Version 3.0.
set confirm
53