Clear Mobility-Domain; Clear Mobility-Domain Member - 3Com WX4400 Command Reference Manual

270 C 9: M
HAPTER OBILITY
clear
mobility-domain
clear
mobility-domain
member
D C
OMAIN OMMANDS
Clears all Mobility Domain configuration and information from a WX
switch, regardless of whether the WX switch is a seed or a member of a
Mobility Domain.
Syntax —

clear mobility-domain

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — This command has no effect if the WX switch is not configured
as part of a Mobility Domain.
Examples — To clear a Mobility Domain from a WX switch within the
domain, type the following command:
WX1200# clear mobility-domain
success: change accepted.
See Also
clear mobility-domain member on page 270
set mobility-domain member on page 273
set mobility-domain mode member seed-ip on page 274
set mobility-domain mode seed domain-name on page 275
On the seed WX switch, removes the identified member from the
Mobility Domain.
Syntax —
clear mobility-domain member ip-addr
— IP address of the Mobility Domain member, in dotted
ip-addr
decimal notation.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.