3Com WX4400 Command Reference Manual page 474

474 C 13: IGMP S
HAPTER
WX1200# display igmp receiver-table group 237.255.255.0/24
VLAN: red
Session
--------------- ---- --------------- ----------------- -----
237.255.255.2
237.255.255.119
VLAN: green
Session
--------------- ---- --------------- ----------------- -----
237.255.255.17
237.255.255.255
C
NOOPING OMMANDS
The following command lists all receivers for multicast groups
237.255.255.1 through 237.255.255.255, in all VLANs:
Port Receiver-IP
2 10.10.20.19 00:02:04:06:09:0d
3 10.10.30.31 00:02:04:06:01:0b
Port Receiver-IP
1 10.10.40.41 00:02:06:08:02:0c
6 10.10.60.61 00:05:09:0c:0a:01
Table 78 describes the fields in this display.
Table 78 Output for display igmp receiver-table
Field
VLAN
Session
Port
Receiver-IP
Receiver-MAC
TTL
See Also
set igmp receiver on page 485
Receiver-MAC
Receiver-MAC
Description
VLAN that contains the multicast receiver ports. Ports are
listed separately for each VLAN.
IP address of the multicast group being received.
Physical port through which the WX can reach the
receiver.
IP address of the receiver.
MAC address of the receiver.
Number of seconds before this entry ages out if the WX
does not receive a group membership message from the
receiver. For static multicast receiver entries, the TTL value
is undef. Static multicast receiver entries do not age out.
TTL
112
112
TTL
12
111