Display Ntp - 3Com WX4400 Command Reference Manual

display ntp

Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status
----------------------------------
Enabled
Table 37 describes the fields in this display.
Table 37 Output for display ip telnet
Field Description
Server Status State of the HTTPS server:
Enabled
Disabled
Port TCP port number on which the WX switch listens for Telnet
management traffic.
See Also
clear ip telnet on page 135
display ip https on page 149
set ip https server on page 171
set ip telnet on page 175
set ip telnet server on page 176
Shows NTP client information.
Syntax — display ntp
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Port
23
display ntp 153