Set Radio-Profile Short-Retry; Set Radio-Profile Wmm; Set Service-Profile Attr - 3Com WX4400 Command Reference Manual

set radio-profile
short-retry
set radio-profile
wmm
set service-profile
attr
Deprecated in MSS Version 4.2. In 4.2, this parameter is associated with
service profiles instead of radio profiles. See set service-profile
short-retry-count on page 412.
Deprecated in MSS Version 4.2. To enable or disable WMM, see set
radio-profile qos-mode on page 383.
Configures authorization attributes that are applied by default to users
accessing the SSID managed by the service profile. These SSID default
attributes are applied in addition to any supplied by the RADIUS server or
from the local database.
Syntax —
set service-profile name attr attribute-name value
— Service profile name.
name
attribute-name value
using to authorize SSID users for a particular service or session
characteristic. For a list of authorization attributes and values that you
can assign to network users, see Table 43 on page 253. All of the
attributes listed in Table 43 can be used with this command except
ssid.
Defaults — By default, a service profile does not have any authorization
attributes set.
Access — Enabled.
History —Introduced in MSS 4.1.
Usage — To change the value of a default attribute for a service profile,
use the set service-profile attr command and specify a new value.

set radio-profile short-retry

— Name and value of an attribute you are
391