3Com WX4400 Command Reference Manual page 679

A WX switch can have up to four boot profiles, numbered 0 through 3.
Only one boot profile can be active at a time. You can create, change,
and delete boot profiles. You also can activate another boot profile in
place of the currently active one.
Syntax — display
Defaults — None.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Examples — To display the currently active boot profile, type the
following command at the boot prompt:
boot> display
BOOT Index:
BOOT TYPE:
DEVICE:
FILENAME:
FLAGS:
OPTIONS:
Table 113 describes the fields in the display.
Table 113 Output of display command
Field
BOOT Index
BOOT TYPE
0
c
boot1:
default
00000000
run=nos;boot=0
Description
Boot profile slot, which can be a number from 0 to 3.
Boot type:
c — Compact flash. Boots using nonvolatile storage or a
flash card.
n — Network. Boots using a TFTP server.
display 679