Set Port - 3Com WX4400 Command Reference Manual

set port

clear port type on page 72
set port type ap on page 95
set system countrycode on page 58
Administratively disables or reenables a port.
Syntax —
set port {enable | disable} port-list
— Enables the specified ports.
enable
— Disables the specified ports.
disable
— List of physical ports. MSS disables or reenables all the
port-list
specified ports.
Defaults — All ports are enabled.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — A port that is administratively disabled cannot send or receive
packets. This command does not affect the link state of the port.
Examples — The following command disables port 6:
WX1200# set port disable 6
success: set "disable" on port 6
The following command reenables the port:
WX1200# set port enable 6
success: set "enable" on port 6
See Also
reset port on page 85
set port 87